radRounds Radiology Network

Connecting Radiology | Enabling collaboration and professional development

Chuang KS, Liu BJ, Huang HK, Yonekawa H, Sankaran A.
Institute of Nuclear Science, National Tsing-Hua University, Taiwan.

Radiographics. 1994 Mar;14(2):397-403; discussion 404-5

Most digital modalities in radiology use 12 bits precision to store the digital images. To determine whether all these bits contain useful information, a statistical method called the Moran test was used to measure the noise level in computed tomographic, magnetic resonance, and digital radiographic images. The test was performed on the bit planes of each pixel. After the noise level was estimated, the pixel data were separated into signal bits and noise bits, and image enhancement techniques were applied on the noise-bits-removed images to demonstrate that the removal of noise bits did not affect image quality. Preliminary results showed no noticeable difference between the original images and the noise-bits-removed images.

Posted via PubMed for educational and discussion purposes only.
Link to PubMed Reference

Views: 1

Sponsor Ad

© 2024   Created by radRounds Radiology Network.   Powered by

Badges  |  Report an Issue  |  Terms of Service